Barn Door Handles: OEM Sizing and Hole Spacing Guide
To specify barn door handles for an OEM project, define overall length, bar section, projection, center-to-center hole spacing, mounting arrangement, door thickness, and clearance to the track and lock on one controlled drawing. Do not select or approve a handle from overall length alone. The hole pattern must match the door, projection must leave usable […]
Pergola Bracket Kit BOM: OEM Procurement Checklist
A reliable pergola bracket kit BOM is a controlled procurement record that connects every component family to an approved drawing revision, buyer-defined acceptance requirement, packaging level, label record, and inspection document. Do not begin with an assumed “standard kit” or copy quantities from a catalog image. Begin with the buyer’s kit configuration, map each required […]
Barn Door Floor Guide: Selection and OEM Checklist
A B2B specification guide for distributors, importers, hardware brands, and project buyers selecting, validating, and sourcing barn door bottom guides.
Strap Hinges: Sizing, Installation and OEM Specs
A practical B2B guide to specifying and installing strap hinges on wooden gates and shed doors, with a comparison table, field checklist, verified Jiansen model facts, and an OEM/private-label RFQ framework.
Fence Hinges for Gates: Types, Finishes & OEM Sourcing
Fence hinges should be selected as a load-and-environment system, not as a decorative accessory. A buyer needs to match hinge geometry, base metal, finish, fasteners, gate construction, duty cycle, and exposure conditions. T/tee hinges are economical for many timber gates; strap hinges spread load across wider leaves; heavy-duty designs suit larger or frequently operated gates; […]
Pergola Post Base Brackets: Anchoring and Corrosion Specs
Direct answer A pergola post base bracket does three jobs at once: it transfers the post load into the slab, it holds the end grain of the post clear of standing water, and it survives the corrosion environment created by the fasteners and the treated timber around it. Most wholesale complaints about post bases trace […]
Heavy Duty Pergola Brackets: Load Ratings, Bolt Specs & Span Selection
Direct answer “Heavy duty” is not a rating. For pergola brackets it should mean four measurable things: steel thickness of 3 mm (0.118″) or greater, an inner opening matched to your actual timber cross-section within 2–3 mm, a fastener pattern that allows lag screws to reach at least 4× their diameter of penetration per the […]
Barn Door Hardware OEM & ODM: A Wholesale Buyer’s Guide
Short answer: OEM (your design, factory-produced) and ODM (factory design, your brand) are the two routes importers use to build a private-label barn door hardware line. ODM is the faster, lower-risk start — you select from a manufacturer’s proven platform (track profile, roller design, load-rated components), add your logo, finish color, and packaging, and launch […]
Carbon Steel vs Stainless Steel Barn Door Hardware
Short answer: For standard interior installations, powder-coated carbon steel is the volume choice — it costs roughly a third of stainless, carries the same published load ratings when built with the same track profile, and accepts any finish color. Specify 304 stainless steel where humidity, coastal air, or design specs demand corrosion resistance, and 316 […]
Self-Closing Gate Hinges: What a Good Warranty Actually Covers and How to Compare Manufacturers
Short answer: A self-closing gate hinge warranty is worth very little if it only covers the spring and not the polymer body, the closing-tension mechanism, or corrosion. When comparing manufacturers, look past the headline “lifetime warranty” and check four things: what components are covered, the tested cycle count, whether corrosion is included for outdoor use, […]
